I got this gun a while back, and it became my project to make a working osiris cocker, with a timmy frame, and half blocked of course. I still have some upgrading to do, obviously the reg, and the second LPR on the ASA, but other than those and grips, this beast is done...and let me say that it is FAST, it easly shoots as well as my MQ'ed halfie, I was pleased with how it came out...

here is how it started...(I guess I deleted the pics of it off of my camera before I uploaded them)
anyway, it was a standard 03 with an E1, blue front block, jackhammer 2, qev modded ram, but no QEV's, ion reg, cause I ddn't have anything else laying around, superfly bolt (crap), some fancy dice pull pin, and a couple macro fittings.

now it is totally different:





Its halfed by me of course, JCM bolt and sled, xonik housing, cause it was shinier at the time plus I am gonna anno it, and I wanted to keep my E1 in good condition to sell it some time, jackhammer on the top, sledgehammer on the ASA as the osiris ram power, 05 timmy frame, mini front block, QEV's on the ram, ASP noid for the osiris, E2 noid for the frontblock, E1 board (fried my Tboard by accidentially desoldering a tiny resister, and alot of modding to get everything to fit together.

all I have left is some final tweaking, some final upgrading, grips, and a nice new anno by me, I am thinking blue, purple, black acidwash, with dark green splash over it, orno splash, and just have the green in the combo minus the black, making a nice alien style anno.

I only have one complaint, as my switch does not work the other way, the gun fires on the trigger release, the other side of the switch is fried, but its fine with me, this is not a tourney gun, it still rips, and it really is a nice feel when shooting it.

let me know what you think!

WOW franklin-cocker.....but looks nice.

put some grips on it and change those things you said and it should be hott

A new feedneck, new reg and new barrel. then anno it.
Its going to look sick once its completed... to you!

how balanced does it feel?
it looks like it would be off balance.

i cant begin to say how nice the frame mod looks as well as the half. great job!

Looks very comfortable!!

pics of inside the gripframe?

Looks really nicely done, inside frame pics please.

Whats with the LPR on the ASA?

and imo id like the frame farther forward that just seems weird

Nice job, Blake! That's sick.

here are inner grips pics, I got grip panels today for it, and it makes it much more comfy to hold, I also added a QEV, which allowed me to half my dwell time to only 6ms, which is not bad, I can go to 5, but I get too much velocity fluctuation, all I need now is a nicer reg definatly going with the sidewinder, and LPR though I may have fixed its creaping issues, it still lags back in long strings, I think a micro rock is in order!

pics!







I know the last pic is terrable, I was trying to show the noid, as you can see in the first pic, I have to place everything in exactly correctly for it to work, that and also I have a few strips of electrical tape over the entire assembly so I can change settings easier (have to take apart clamshell)

and as for balance, its perfect, its actually more comfy imo than a standard frame by far, witha tank, and hopper on there, it feels great in the hands!

Did you make the ram system yourself?

Si senior!

can we see the second ram?

very nice,, check your pm's

I will show pics of it next time I take it apart, but as of now, I do not want to mess with it, as its shooting perfectly!

but the gearbag fairies killed your mq :/

here are pics of the lower tube ram system, it works great, and its all stuff you can get at ace hardware, and lowes or something similar.

pics:





the parts are:
-standard cocker hammer
-2 oring, not sure what size, but they were the samewhen I bought them
-about a 1.5 inch long 10/32 threaded rod
-a half inch spacer 10/32 threaded aluminum
-3 X 1/4" long, 3/8 diameter nylon spacers
-3/8 inch pipe, I belive its around 1.5 inches long about
-steel spacer, 1/2 inner diameter, to get rid of some of the wiggle room.
-modified IVG to have propper relief of the ram tube, and house the QEV
-clippard QEV
-and a conical spring for hammer return


pretty simple, and self explanitory

whats the pressure needed for the ram to function?

~70psi or so, the max the noid can handel...and at 6ms dwell, but unlucky for me, the LPR I am using is crap, and creeps all the time, so I have to get a new one, I am thinking about a micro rock or something like it, so I get consistant velocity, as of now, its around 240 FPS, and needs a new HPR to rais the pressure a little bit more so it will fire the balls out there a little quicker, the higher I go, the faster I can get velocity out ot it, though the ion reg maxxes out around 250psi or so I think...

you might whanna consider one of these noids:
http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS

I have one and they are sweet was gunna use it for a e-pnuemagproject but decided to just stay pnuemag so if ya want it lmk Mabey we could cut a deal on the anno or something.

I actually got mine from ASP, I considered that one, but it would not really save me any space, and is rated for the same pressure that the noid I used is, its this one:

http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS

its really fast as it is, and with the QEV, it allowed me to get up to cycle rates with the noid of around 25-30 CPS, which is pretty good for me, it sounded like a blowback running out of air, just a loud hum.

so as of now, my top priority is to get a new front reg, and then my next priority is a new LPR, then after that, maybe a barrel, and ego feedneck mod it, and anno, then its totally complete.